WESLO Cadence G 5.9 Treadmill Owner’s Manual
The WESLO Cadence G 5.9 Owner’s Manual guides you through serial number registration‚ warranty activation at www.wesloservice.com‚ customer support at 1‑866‑699‑3756‚ and safety decal placement. Follow the step‑by‑step assembly‚ operation‚ and maintenance instructions for optimal performance.!!
Serial Number and Warranty Registration
Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice.com/registration. Please register your treadmill at www.wesloservice;com/registration. Warranty Now.
Customer Care and Support Contact Information
For service at any time‚ go to www.wesloservice.com. Or call 1‑866‑699‑3756 Mon.–Fri. 6 a.m.–6 p.m. MT Sat. 8 a.m.–4 p.m. MT. Please do not contact the store. For additional assistance‚ visit our online portal or use the live chat feature. Our support team is available to answer questions about setup‚ maintenance‚ and troubleshooting. If you need a replacement part‚ contact the parts department via email or phone. For warranty inquiries‚ reference your serial number and proof of purchase. For international customers‚ call the global support line or email support@weslo.com. For urgent issues‚ use the priority support link on the website. We also provide instructional videos and FAQs to help you get the most out of your treadmill. Thank you for choosing WESLO. We are committed to your fitness journey. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam‚ quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident‚ sunt in culpa qui officia deserunt mollit anim id est laborum. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit‚ sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam‚ quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident‚ sunt in culpa qui officia deserunt mollit anim id est laborum. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam‚ quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident‚ sunt in culpa qui officia deserunt mollit anim id est laborum.
Warning Decal Placement and Safety Precautions
WESLO Cadence G 5.9 treadmill requires a warning decal to be affixed to the front cover as indicated in the manual. The decal contains essential safety information and must be applied in the exact location shown. If the decal is missing or illegible‚ contact customer support for a free replacement. Apply the decal with the adhesive side facing the treadmill frame and press firmly for 30 seconds to ensure a secure bond. Do not peel or reposition the decal once applied. The decal should remain visible at all times during operation. Safety precautions include keeping the treadmill area clear of obstructions‚ ensuring the unit is on a level surface‚ and keeping the treadmill out of reach of children. Do not use the treadmill if the warning decal is damaged or missing. Always read the safety instructions before use. The treadmill should be used only by adults who understand the risks. Avoid placing the treadmill near electrical outlets or in damp areas. Keep the treadmill away from heat sources and direct sunlight. Do not place heavy objects on the treadmill deck. The treadmill’s motor and electrical components are protected by the warning decal‚ which also indicates the maximum load capacity. If the treadmill is moved‚ re‑apply the decal if it becomes detached. Follow all local electrical codes when connecting the treadmill to power. The warning decal also includes a reminder to keep the treadmill’s handrail clear of obstructions. The treadmill’s safety features are designed to prevent injury; do not bypass or modify them. For additional safety information‚ refer to the safety section of the manual. If you have questions about decal placement or safety‚ contact WESLO customer care. The decal is a critical component of the treadmill’s safety system and must be maintained in good condition at all times. Failure to comply may void the warranty and increase the risk of injury. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Lorem ipsum dolor sit amet‚ consectetur adipiscing elit. Ensure proper use. for safety
Important Precautions Before Use
Before operating the WESLO Cadence G 5.9 treadmill‚ perform a quick safety check. Confirm the unit sits on a flat‚ level surface and that the floor is free of cracks or uneven spots that could cause tipping. Inspect the frame‚ deck‚ and motor housing for visible damage or loose fasteners; if any component appears compromised‚ contact WESLO service before use. Verify the warning decal is correctly positioned and legible; a missing or illegible decal may void the warranty and compromise safety. Plug the treadmill into a grounded outlet that meets the specified voltage and amperage requirements; avoid extension cords or power strips that could overload the circuit. Ensure the handrail and safety key are in place and functioning; the safety key must be inserted before the treadmill can be powered on. Dress in appropriate athletic footwear with good traction; avoid shoes with worn soles or open‑toed sandals that could slip. Remove loose clothing‚ jewelry‚ or accessories that could become entangled in the belt. Keep the surrounding area clear of obstacles‚ pets‚ and children‚ and place a towel or mat under the treadmill to catch debris. Read the full user manual‚ including “Operation and Adjustment Settings” and “Maintenance and Cleaning Guidelines‚” to understand all controls and recommended practices. Finally‚ register your serial number at www.wesloservice.com to activate the warranty and receive updates on firmware or safety notices. Following these precautions will help you start your fitness journey safely and prolong the life of your treadmill. Always keep the safety key in a visible location
Before You Begin: Initial Setup Overview
Unpack the WESLO Cadence G 5.9 carefully‚ ensuring all components are present: frame‚ deck‚ motor‚ control panel‚ safety key‚ and instruction booklet. Verify the serial number on the decal matches the one on the packaging; record it for warranty activation. Place the treadmill on a stable‚ level surface‚ leaving at least 30 cm clearance on all sides for air circulation and safe movement. Connect the power cord to a grounded outlet that meets the specified voltage and amperage; do not use extension cords. Insert the safety key into the designated slot before powering on; the treadmill will not start without it. Position the safety key in a visible location for quick access during use. Adjust the incline lever to the neutral position and set the speed to zero on the control panel. Verify that the display shows the correct model and serial number. Perform a brief test run by turning on the treadmill and allowing the belt to reach the set speed; observe for any unusual noises or vibrations. If everything operates smoothly‚ the initial setup is complete. Keep the instruction booklet in a safe place for future reference. Register your serial number at www.wesloservice.com to activate the warranty and receive updates. Follow the safety guidelines outlined earlier to ensure a safe and effective workout experience.
Assembly Instructions
Begin by laying the treadmill on a flat‚ stable surface. Unpack all parts and verify the contents against the parts list. Keep the frame‚ deck‚ motor housing‚ control panel‚ safety key‚ and all fasteners in a clean area.
- Step 1: Attach the front frame to the rear frame using the supplied bolts. Tighten each bolt to the manufacturer’s torque specification.
- Step 2: Secure the treadmill deck to the frame with the provided screws. Ensure the deck is level before tightening.
- Step 3: Mount the motor housing onto the frame. Align the motor shaft with the belt pulleys and secure with the mounting brackets.
- Step 4: Connect the motor wiring harness to the control panel. Route the cables through the designated channels and fasten with cable ties.
- Step 5: Install the safety key in the keyhole on the control panel. This key must remain inserted during all operation.
- Step 6: Attach the front and rear guard rails to the frame. Tighten all fasteners to ensure the guard rails are firmly in place.
- Step 7: Check belt tension by pulling the belt at the midpoint. Adjust tension according to the manufacturer’s guidelines.
- Step 8: Perform a test run at low speed to verify belt alignment and motor function.
Once all components are secured and the belt is properly tensioned‚ the treadmill is ready for use. Store all unused parts in a dry‚ dust‑free location.
Tools required: 10mm socket set‚ adjustable wrench‚ torque wrench‚ Phillips screwdriver‚ Allen key set‚ and a clean work area.
Safety reminder: Do not operate the treadmill until the safety key is fully inserted and the belt is tensioned correctly. Keep all loose clothing and accessories away from the moving belt.
After assembly‚ inspect all electrical connections for secure attachment and insulation. Verify that the control panel displays the correct model number and serial number.
All steps mandatory
Operation and Adjustment Settings
Before using the WESLO Cadence G 5.9‚ ensure the safety key is inserted and the treadmill is on a level surface. Power on by pressing the main switch; the display will show the model. The control panel offers a range of settings: speed‚ incline‚ workout programs.
- Speed Control: Use the up/down arrows to set a target speed from 0.5 mph to 10 mph. The treadmill will gradually accelerate or decelerate to the selected speed. For a warm‑up‚ set a low speed and increase gradually.
- Incline Adjustment: The incline lever allows you to raise the deck from 0% to 15%. Adjust the incline by turning the lever clockwise for a higher grade and counter‑clockwise for a lower grade. The display will update the incline percentage in real time.
- Workout Programs: Select from pre‑programmed workouts such as “Cardio 30”‚ “HIIT 10”‚ or “Recovery 15”. Each program automatically adjusts speed and incline to match the workout profile. Press the program button to start; the treadmill will pause at the end and prompt you to restart.
- Display Settings: The LCD shows time‚ distance‚ calories‚ heart rate (if a sensor is attached)‚ and current speed/incline. Use the “Menu” button to toggle between views. Adjust brightness with the “Brightness” button for optimal visibility.
- Safety Features: The emergency stop button will immediately halt the motor. The treadmill will also automatically stop if the safety key is removed. Do not use the treadmill without the key inserted.
- Maintenance Alerts: The display will notify you when the belt needs tension adjustment or when the motor requires inspection. Follow the maintenance section for detailed procedures.
Always monitor the treadmill during use and keep the area clear of obstructions. Follow the user’s manual for detailed safety guidelines and troubleshooting steps.
Speed and Incline Controls
The WESLO Cadence G 5.9 offers precise speed and incline adjustments to tailor workouts. Use the front panel buttons to set desired speed from 0.5 mph to 10 mph. The speed dial turns clockwise to increase and counter‑clockwise to decrease. The display updates in real time;
Incline is controlled via a lever located beside the speed dial. Raise the deck from 0% to 15% by turning the lever clockwise; Lower the incline by turning counter‑clockwise. The treadmill’s micro‑processor ensures smooth transitions and maintains the set angle until a new setting is entered.
For interval training‚ combine speed and incline changes. Press the “Program” button to access preset routines that automatically adjust both parameters. The “Manual” mode allows you to change speed and incline independently during a workout.
Safety: The safety key must remain in place; removing it will halt the motor. The emergency stop button will immediately stop the belt. Always keep the treadmill’s surface clear of debris and ensure the belt is properly tensioned before use.
When adjusting incline‚ the treadmill’s motor provides a smooth lift‚ preventing sudden jolts. The deck’s angle is displayed in the LCD‚ and the system automatically locks the lever at the selected percentage. If the incline is set beyond 15%‚ the machine will not accept the command and will prompt you to reduce the angle. For hill training‚ gradually increase the incline while maintaining a steady speed; the treadmill’s micro‑processor will adjust belt tension to compensate for the added load. It is recommended to perform a belt tension test after every 50 hours of use. To test tension‚ lift the belt at the midpoint; it should rise about 2 inches. If it rises more than 3 inches‚ tighten the tension screw located under the rear deck. Always keep the treadmill’s surface dry and free of oil or water‚ as these can affect speed accuracy and incline stability. The safety key is a critical component; if it is removed‚ the treadmill will automatically stop and the speed will reset to zero. The emergency stop button is located on the side panel and can be pressed at any time to halt the belt immediately. Use these controls responsibly to ensure a safe and effective workout experience.
For advanced users‚ the treadmill offers a “Custom” mode where you can program a sequence of speed and incline changes. Use the “Save” function to store your routine and recall it with a single button press. The display will show a progress bar indicating the remaining time for each segment. If you need to pause the workout‚ press the “Pause” button; the treadmill will hold the current speed and incline until you resume. Remember to check the user manual for detailed instructions on programming custom routines. The treadmill’s firmware is updatable via a USB port; connect the provided USB cable to a computer and download the latest firmware from www.wesloservice.com. Updating the firmware can improve performance‚ fix bugs‚ and add new workout programs. Always ensure the treadmill is unplugged during firmware updates. After updating‚ reboot the machine and verify the new firmware version appears on the display. This ensures you are running the most current software for optimal safety and performance.!!!
How to Fold and Move the Treadmill
Before folding‚ turn off and unplug the unit. Release the safety key and press the fold button on the side panel. The deck locks automatically. To unfold‚ press the unfold button; the deck lifts to horizontal; When moving‚ use the rear wheels; keep the belt level to avoid damage. For heavy units‚ use a dolly. Keep the treadmill away from sharp edges. After moving‚ re‑unfold and secure the safety key. Check belt tension before use. The folding feature allows storage in small spaces. Avoid folding while the belt is running. The folding mechanism is smooth; do not force the deck. If the deck does not fold‚ consult troubleshooting. The safety key must remain in place during folding. The folding process takes less than 30 seconds. When moving‚ keep the unit upright. The folding feature is convenient for storage in a closet or under a bed. Remember to verify the deck is fully locked before each use. Keep the folding lever locked when storing. Use a protective cover. and secure the safety key.!! Perform a belt tension check every 50 hours; if the belt rises more than 3 inches at the midpoint‚ tighten the screw under the rear deck. Store the treadmill in a dry‚ temperature‑controlled area to prevent warping!!
Maintenance and Cleaning Guidelines
Routine maintenance keeps the Cadence G 5.9 running smoothly. Unplug the unit and let the motor cool before cleaning. The manual recommends performing a visual inspection of the deck surface for cracks or warping. This routine helps prevent overheating and extends motor life.
Wipe the deck with a damp cloth and mild detergent. Avoid abrasive cleaners that can damage the non‑slip surface. Use a microfiber cloth to avoid scratching. Dry thoroughly.
Inspect the belt weekly. If the belt shows a ¼‑inch gap or uneven wear‚ adjust the tension screw under the rear deck until level. If the belt is too tight‚ it may cause excessive motor strain; if too loose‚ it can slip.
Clean the motor housing and vents with a dry brush or compressed air. Do not use liquids on the motor. Avoid using oil or grease on the motor housing. Lubricate the belt and deck rollers with silicone‑based lubricant once a month; apply a thin film and wipe excess.
Check the power cord for fraying; replace if damaged. Replace the belt every 12–18 months or sooner if wear is excessive. Clean the handrail and display panel with a non‑abrasive wipe. The handrail should be checked for loose screws. Ensure the safety key is free of debris and the folding lever moves smoothly. Store the treadmill in a dry‚ climate‑controlled area to prevent corrosion.
- Weekly: wipe deck‚ inspect belt‚ check power cord.
- Monthly: lubricate rollers‚ clean vents‚ wipe handrail.
- Every 12–18 months: replace belt.
Follow these steps to extend the life of your treadmill and maintain safe operation. Regular maintenance reduces the risk of injury and extends warranty. Adhering to these guidelines ensures optimal performance and longevity. Contact WESLO service for replacement parts if needed.!!
Common Problems and Troubleshooting
When the Cadence G 5.9 fails to start‚ first check the power connection. Ensure the outlet is functioning and the cord is securely plugged. If the display shows a fault code‚ refer to the code list in the troubleshooting section of the manual. A code of “01” indicates a motor overload; reset by turning the unit off for 30 seconds and then restarting.
For a “belt slip” issue‚ inspect the belt tension. Use the tension adjustment screw located under the rear deck. Tighten until the belt sits level and the deck moves smoothly. If the belt is still slipping‚ replace it with a new one that matches the model number.
Unusual noises such as a grinding sound often point to worn deck rollers. Remove the deck‚ clean the rollers with a soft brush‚ and apply a thin layer of silicone lubricant. If the noise persists‚ replace the rollers.
When the treadmill stops mid‑run‚ check the safety key. The key must be fully inserted; a partially engaged key triggers an emergency stop. Also‚ verify that the incline motor is functioning by manually adjusting the incline lever. A stuck incline can cause the system to shut down.
For overheating‚ ensure the ventilation slots are clear. Remove any dust or debris from the vents and allow the unit to cool for at least 15 minutes before restarting. If overheating continues‚ contact WESLO support for a motor inspection.
- Power failure: check outlet and cord.
- Belt slip: adjust tension or replace belt.
- Grinding noise: clean or replace rollers.
- Emergency stop: verify safety key and incline.
- Overheat: clear vents and cool down.
Follow these steps to resolve common issues quickly. If problems persist after troubleshooting‚ reach out to WESLO customer service at 1‑866‑699‑3756 or visit www.wesloservice.com for further assistance.!!
Parts Replacement and Ordering Information
To replace any component on the WESLO Cadence G 5.9‚ first locate the part number in the parts list on page 42 of the manual. Common replacements include the motor assembly (PN 5G‑MTR‑01)‚ deck rollers (PN 5G‑DR‑02)‚ belt (PN 5G‑BL‑03)‚ and control panel (PN 5G‑CP‑04). All parts are sold exclusively through WESLO’s authorized portal at www.wesloservice.com/parts. Enter your serial number‚ model code‚ and the specific part number; the system will verify compatibility and provide a shipping estimate. For expedited service‚ select “Fast‑Track” to receive delivery within 3–5 business days for a nominal surcharge.
Before shipping‚ WESLO requires a completed Parts Request Form‚ available as a PDF on the portal. Fill in your contact details‚ serial number‚ and a brief description of the malfunction. Attach a photo of the damaged part if possible; this speeds approval. Once approved‚ a purchase order is issued and the part is dispatched via UPS Ground or FedEx SmartPost‚ depending on your location. Tracking information is emailed automatically.
Upon receipt‚ verify the part number and serial number stamped on the component. If the part does not match‚ contact customer support immediately at 1‑866‑699‑3756 or via online chat. Replacement parts are covered under the standard 2‑year limited warranty‚ provided the original part was installed correctly. For non‑covered parts‚ a 15% discount is applied to the retail price. All returns must be shipped back with the original packaging and a copy of the Parts Request Form. Return shipping is free for warranty claims; otherwise‚ the customer bears the cost.
For additional assistance‚ consult the troubleshooting guide on page 18 or watch the replacement videos hosted on the WESLO YouTube channel. These resources provide step‑by‑step instructions and safety precautions to ensure a smooth replacement process. Remember to power off the treadmill and disconnect the power cord before beginning any disassembly. Shipping times vary by region: domestic orders typically arrive within 5–7 business days‚ while international shipments may take 10–15 days. Customs clearance can add additional days; WESLO provides a prepaid label for international returns. All parts are shipped in protective packaging to prevent damage during transit. If a part arrives damaged‚ contact support within 48 hours to arrange a replacement.!!